Lock-N-Load Pro
A) Full Size
B) Mini
The All New Lock-N-Load Pro Moto Transport System
Aluminum Construction
Fully Adjustable
Rubberized Jaws
Switch Release
Mounting Plate
How to install Lock-N-Load Pro
Wood Floor Installation and Use
Truck Bed Installation and Use
Available in Two Sizes
Feature Comparison of the Lock-N-Load Family
|
|
|
|
|
| Features | Lock-N-Load Pro | Lock-N-Load Pro Mini | Lock-N-Load (Original) | Lock-N-Load Junior |
| MSRP | $299.99 USD | $299.99 USD | $199.99 USD | $199.99 USD |
| Saves your fork seals by reducing pressure on them | ✔ | ✔ | ✔ | ✔ |
| No more straps or wheel chocks | ✔ | ✔ | ✔ | ✔ |
| Load more bikes and gear in your truck, van, or trailer | ✔ | ✔ | ✔ | ✔ |
| Quick release from floor | ✔ | ✔ | ✔ | ✔ |
| Fully adjustable | ✔ | ✔ | ✘ | ✘ |
| Easy storage when not in use | ✔ | ✔ | ✘ | ✘ |
| Types of bikes that can be hauled | Generally most medium to full size dirt bikes, trial bikes and motocross races bikes. See details for proper bike fitment | Generally most small size dirt bikes, trial bikes and motocross races bikes. See details for proper bike fitment | Full size MOTOCROSS SPECIFIC RACE BIKES only | Generally 85cc Motocross Race Bikes only (Including the CRF150R) |
| Extra mounting plates available (Sold Separately) | ✔ | ✔ | separate plates for truck vs. trailer | separate plates for truck vs. trailer |
| Works with 2-strokes and 4-strokes | ✔ | ✔ | Limited - See details for proper bike fitment | Limited - See details for proper bike fitment |
| Dirt Bike Maximum Weight | 315 lbs | 200 lbs | Restricted by bike size, not weight | Restricted by bike size, not weight |
| Dirt Bike Minimum Peg Width | 12" | 12" | 18" | 18" |
| Dirt Bike Maximum Peg Width | 21" | 21" | 22" | 22" |
| Dirt Bike Minimum Peg Height | 12.5" | 8.5" | 15" | 12.5" |
| Dirt Bike Maximum Peg Height | 18" | 12" | 17.5" | 14.75" |
| Fitment Guides |
|
|
|
|
| Size of the Lock-N-Load | 20” x 10” x 18” | 20” x 10” x 16” | 20” x 10” x 18” | 20” x 10” x 16” |
| Weight of the Lock-N-Load | 13.2lb | 12.6lb | 20lb | 19lb |
What's Included
Lock-N-Load Pro or Pro Mini
- [1] Lock-N-Load Pro Mounting Plate
- [2] Lock-N-Load Pro Uprights
- Mounting Hardware
- Instructions
Parts & Accessories
Additional Mounting Plate
Replacement Rubber Jaw
Videos
Hennessey VelociRaptor 600 Sherco Edition
PANIC REV Motocross Trailer
- Lock-N-Load Pro
- Model# 00174
- Size: 20” x 10” x 18” (50.8cm x 25.4cm x 45.7cm)
- Weight: 13.2lb (5.98kg)
- Plate Dimensions: 21.25” x 6.75” x 0.5” (54cm x 17.1cm x 1.3cm)
- 1 year warranty
Designed to fit 85cc to Enduro bikes
(or bikes with similar geometry)
Max Weight: 315lbs (142.9Kg)
- Lock-N-Load Pro Mini
- Model# 00176
- Size: 20” x 10” x 16” (50.8cm x 25.4cm x 40.6cm)
- Weight: 12.6lb (5.71kg)
- Plate Dimensions: 21.25” x 6.75” x 0.5” (54cm x 17.1cm x 1.3cm)
- 1 year warranty
Designed to fit 50cc jr to 110cc MX bikes
(or bikes with similar geometry)
Max Weight: 200lbs (90.7Kg)
How to measure your bike
To properly measure your bike, ask for assistance to hold your bike perfectly vertical and use two tape measures at the same time to measure footpeg height. Make sure both measurements are the same. Feel free to call if you have any bike specific questions. Select your desired size in the online store when ordering.
The jaws are fairly large and we have found that they will fit most oversized or rotating aftermarket foot pegs on the market.
California Prop. 65 WARNING:
This product can expose you to Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.