EZ3 Jug Only SKU#00281

EZ5 Jug Only SKU#00389

EZ3 w/Spout SKU# 00131

EZ5 w/Spout SKU# 00132

EZ3 w/Spout & Floor Mount SKU# 14209

EZ5 w/Spout & Floor Mount SKU# 14210

EZ Utility Jug

EZ3 Jug Only $39.99 USD

EZ5 Jug Only $49.99 USD

EZ3 w/Spout $59.99 USD

EZ5 w/Spout $69.99 USD

EZ3 w/Spout & Floor Mount $74.99 USD

EZ5 w/Spout & Floor Mount $89.99 USD

A fast-flowing utility jug with premium features and accessories

The EZ Utility Jug is exactly what the name implies. It is a 3 gallon (12 liter) or 5 gallon (20 Liter) Utility Jug that is simply easy to use. It has a triple handle design that is completely unique. The top handle and side handle are obvious, but it is the third fingertip handle at the front of the jug that comes in handy during the end of the pour. This triple handle design allows the user to carry and pour at any angle with comfort and control.

Durable Construction

Carry and pour with confidence knowing that the EZ Utility Jug is constructed from thick-walled, high-density, polyethylene plastic, ensuring it is durable enough to hold up to any fluids you may transport.

Anodized Aluminum Breather

The EZ Utility Jug also solves the common problem of liquid spilling from the vent hole, which is commonly placed entirely too close to the cap and spout. Risk placed the vent on the EZ Utility Jug on the very back of the top handle, keeping it far from the main cap ensuring plenty of venting without the spills.

Transport Securely

Safely securing a utility jug for transport can also be a hassle. Risk has solved this issue as well. The EZ Utility Jug has an accessory called The EZ Jug Floor Mount (compatible with the EZ3 and EZ5). This hardened steel frame mounts easily to the floor of a trailer, van or truck bed. The EZ Utility jug then snaps right in place, preventing it from falling over during transit. Additionally, a padlock can be placed through the EZ Floor Mount to securely lock the EZ Utility Jug to your truck or trailer, protecting your investment.

Features

3 gallon (12 liter) or 5 gallon (20 liter)

Durable thick-walled HDPE plastic

3 ergonomic handle design

Unique breather allows adjustable venting,
prevents leaks/spills and won’t fall out or get lost

Flat surface in center of jug for custom graphics

Transport safely and securely with the EZ Floor Mount

Recommended with our “Hose Bender” spout

*NOTE: EZ Jugs are NOT portable fuel containers as described by ASTM, EPA, ARB and other official agencies. NOT SOLD FOR OR TO BE USED AS A PORTABLE FUEL CONTAINER. Your use of utility jugs as fuel containers or gas cans may violate the law of your state. Please check your own state law for the legal requirements pertaining to the use of these utility jugs and gas cans. Intended uses include storage and transport of feed, water, attractants, fluids and other outdoor products. Additional uses include transport, storage, and proper disposal of automotive and construction fluids such as antifreeze, engine oil, gear oils, hydraulic fluid, and transmission fluid. NOT INTENDED FOR DRINKING WATER STORAGE

What's Included

EZ3 or EZ5 Utility Jug

Optional Accessory

Hose Bender Spout

MSRP $22.99

EZ Floor Mount

MSRP $24.99

Specifications

Materials
- Thick-walled HDPE plastic
- Anodized aluminum adjustable breather
- ABS cap
- Large nitrile rubber gasket
Dimensions
- EZ3 (Model# 00281)
  - 3 gallons (12 liters)
  - Size: 10.5″ x 6″ x 17″ (26.7cm x 15.2cm x 43.2cm)
  - Weight: 2.3lb (1kg)
- EZ5 (Model# 00389)
  - 5 gallons (20 liters)
  - Size: 11″ x 8.7″ x 19.9″ (28cm x 22cm x 50.5cm)
  - Weight: 4.3lb (1.95kg)
- EZ Jug Floor Mount (Model# 00399)
  - Use with EZ3 or EZ5 Utility Jug
  - Recommended flathead screw size (not included):
    (Pick the appropriate screw according to your mounting application)
    – Wood or sheet metal flathead screw: #8 – 1″ length
    – Flathead bolt: 3/16″
1-year warranty

Mount Installation

THE BEST SCREW TO MOUNT THE EZ UTILITY JUG FLOOR MOUNT:

A lath or a truss screw is a great screw for the EZ Utility Jug Floor Mount.
- They can be used in wood or sheet metal
- They are self-piercing / self-drilling
- They offer a “wafer / trim washer head” so it is a low-profile, flat head screw with a flat base. The flat base allows the threads of the screw go all the way up to the base of the head (many flat head screws are tapered and the threads don’t go to the head).
- ¾” is a good length to make sure it will span the distance of the truck bed corrugation if you need to reach to the lower part of the corrugated surface.
- Truck bed / van mounting: Don’t over tighten! Truck beds are made from very thin material and it is easy to strip through the sheet metal. No need for it to be really right, just snug it up.
  - It is best to run the screw through the mount where the mount comes in direct contact with the corrugated surface of the truck bed. If you must place a screw to connect to the lower surface of the corrugation, it is best to add washers as spacers between the truck bed and the EZ Jug Mount. If you can’t fit spacers, don’t worry, just let the screw span the distance, but DON’T overtighten, it will just bend the metal. Just stop screwing when the screwhead meets the floor mount and becomes snug.

Screw Examples and places to buy:
Lowes
Amazon
Home Depot

Replacement Parts

Replacement Seals

MSRP $3.99

Replacement Cap

MSRP $6.99

EZ Jugs at the 2023 AIMExpo

EZ Jug Features

Jugs Can Be A Handful

Swapmoto Live Review

California Prop. 65 WARNING:
This product can expose you to Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.